The difference between Shell Matic 10w30 and 10w40 oil, which one is better for motorcycle engines?
GridGroup - The following is the difference between Shell Matic 10w30 oil and Shell Matic 10w40 oil for motorcycle engines.
As we know, oil is a component that plays an important role so that a motorcycle engine can run properly and is not easily damaged and worn out when used.
In Indonesia, there are 2 types of oil that are most commonly used, namely 10w-30 oil and 10w-40 oil. Not only the name is different, the function of the two is different depending on the capacity and type of machine.
For this reason, here is an explanation of the differences between Shell Matic 10w30 Oil and Shell Matic 10w40 Oil.
Get to know Shell Matic Oil 10w30 and 10w40
Shell Matic oil is intended for automatic motorcycle engines, so it is not recommended for its use in motorcycle or sport motorbike engines. This is because each machine has fundamental differences and must be treated according to its specifications.
The 10w-30 and 10w-40 codes have a meaning that indicates the level of viscosity that the oil has.
For Shell Matic 10w30 Oil, the letter W stands for 'Winter' while the number before W indicates the level of viscosity of the oil. Then the number behind the letter W means the average engine temperature.
In other words, 10w30 oil means the level of viscosity that the oil flows into the engine can work normally at an average engine temperature of 30 degrees Celsius. Likewise with 10w40 oil.
An example is Olli Shell Matic 10w30 which has a lower viscosity level than Shell Matic 10w40 oil where the oil flows more easily when the engine is first started.
Meanwhile, Shell Matic 10w40 oil will flow into the engine when the average engine temperature is hot enough so that the oil works more optimally.
On the market, there are still many types of engine oil that have different numbers, either the front or back W numbers. Starting from 20, 30, 40, and so on. The smaller the number, the thinner the oil. Vice versa.
That is the fundamental difference between Shell Matic 10w30 oil and Shell Matic 10w40 oil.
Which is Better for the Engine? Is it Shell Matic Oil 10w30 or Shell Matic Oil 10w40
Considering that these two types of oil have a viscosity that is not too much different, Motor Matic users may be quite confused about which oil is the most appropriate for the engine.
The two types of oil are actually just as good, but it's back to the type of motorbike engine you have. Motor engines also determine the best type of oil that should be used as a lubricant.
For example, for engines with diasil technology with forged pistons, the most suitable type of oil is Shell Matic Oil 10w40. The reason is, this engine technology requires a thicker oil so that it can work optimally on the engine piston.
In addition, if you want to be more fuel efficient, it is recommended to use Shell Matic 10w30 oil. The reason is that this type of automatic motor oil has a lighter load when pumping the engine.
The drawback is that Shell Matic 10w30 oil reduces or shrinks faster because it is too watery.
This is an explanation of the differences between Shell Matic 10w30 Oil and Shell Matic 10w40 Oil for Motor Matic engines. Hope it is useful.
Post a Comment for "The difference between Shell Matic 10w30 and 10w40 oil, which one is better for motorcycle engines?"